The installation procedure is one of the most critical phases in obtaining a fiberglass swimming pool. That's precisely why we maintain an extremely strict and specific set of installation steps when insalling your fiberglass swimming pool. |
| |
|
|
|
|
 |
|
|
Step 1
Pool site is cleared and hole is dug. Ground is leveled, graded, and lined with sand. |
| |
|
|
|
|
|
|
 |
Step 2
Pool is carefully set. Elevations are shot during the backfill process to ensure pool is level. |
| |
|
|
|
|
 |
|
|
Step 3
Complete exterior bracing at dowels, steps, and ledges. This helps the pool to settle and offers stabilization. |
| |
|
|
|
|
|
|
 |
Step 4
While pool is being filled with water, the hole is being backfilled with sand. Process repeats until full. |
| |
|
|
|
|
 |
|
|
Final Step
Finally, the concrete is poured for the decking. It extends under the lip of the pool shell to secure the structure.
|
Copyright ©2011. Furnished by GraphicSlam.com. All rights reserved - SeaGlass Swimming Pools